Puristic yet trimmed to maximum sound quality – the component speaker systems of the P series don’t need to dazzle with visual gimmicks. The whole construction with lots of finesse follows the acoustic performance which is absolutely breathtaking.
The unique glassfiber-paper compound cone of the mid-woofer, the huge but easy to install 2” / 50 mm midrange speaker, the hand-coated silk dome tweeter and the complex crossover network with tweeter level adjustment are only a few of the technical highlights.

So everybody who don´t care about some more installation effort of the 3-way component system will be rewarded with a fantastic resolution and highly accurate spatial reproduction.

  • 6.5” / 165 mm woofer with novel glassfiber-paper compound cone for maximum stiffness combined with lowest moving mass and perfect inner damping
  • 2” / 50 mm midrange with lightweight, hand-coated silk dome for perfect impulse response
  • 1” / 25 mm tweeter with hand-coated silk dome for balanced, natural sound reproduction and lowest compression effects
  • Complex 12 dB crossover network with three-stage tweeter level adjustment; solely equipped with highgrade components:
    – Low-distortion inductors with minimum DC resistance
    – Low-induction metal film resistors
    – Minimum-loss foil capacitors for midrange and tweeter crossover
  • Gold-plated terminals
  • Grille included
Power RMS / max.125 / 250 Watts
Frequency response40 Hz – 25,000 Hz
Impedance4 Ω
Efficiency 1 W / 1 m90 dB
Cone materialTW: Coated silk
M: Coated silk
W: Glassfiber-paper compound
Crossover12 dB with tweeter level adjustment
Outer diameterTW: 58 mm / 2.28″
M: 93 mm / 3.66″
W: 165.5 mm / 6.52″
Installation diameterTW: 49.3 mm / 1.95″
M: 82 mm / 3.23″
W: 142 mm / 5.60″
Installation depthTW: 15 mm / 0.60″
M: 30 mm / 1.18″
W: 67 mm / 2.64″


Delivery contents

2 x Tweeter HELIX P 1T incl. flush mount
2 x Midrange speaker HELIX P 2M
2 x Woofer HELIX P 6B incl. mounting ring and grille
2 x 3-way crossover
2 x Surface mount for tweeter
2 x Fitting spring for tweeter
1 x Mounting material